หุ่นยนต์เพื่อการศึกษาและพัฒนาการเรียนรู้

70217 FRICTION POWERED CAR

฿990.00 ฿860
This flywheel-powered 3-wheel car kit . Different shaped cam parts are included to change the direction of the front wheel.
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : ชุดประกอบหุ่นยนต์สำหรับเด็ก 5-12 ปี
  • รหัสสินค้า : 000718

รายละเอียดสินค้า 70217 FRICTION POWERED CAR

The Educational Construction Series aims to provide fun and informative learning experiences, and

this flywheel-powered 3-wheel car kit continues the theme. Simply rotating the rear wheels or drive

wheel allows the flywheel to store power and then feed it back to the wheels, propelling the model

on its way. What's more, different shaped cam parts are included to change the direction of the front

wheel, altering the course of the model

 

A Pretty Fly Construction Project
This assembly kit creates an eco-friendly 3-wheeled car which runs on the inertia stored by its flywheel,

with no need for motor or batteries! Spin the drive wheel or rear wheels to start the drive unit flywheel

rotating, place the model on the ground, and watch the flywheel power the car forwards. The drive unit

can power the car up to 15 meters, or 35 seconds. It has a top speed of around 1.8 seconds per meter

(roughly 2km/h). Everything is included for easy snap-fit/screw-together assembly.

Cam-Controlled Fun
Fit the included Zig-Zag  cams to the underside, and let them control the course the car takes.

Alternatively, create your own course by modifying the blank cam in this kit. Or to have the car go in one

direction, simply lock the steering unit.

 

Specs

Assembly kit. Length: 141mm, width: 85mm, height: 67mm.

Transparent drive unit shows off the metal flywheel contained inside. The unit can be detached for use on other models.

The flywheel can power the model for approximately 20 meters maximum (around 35 seconds).

When fitted to the underside of the model, the included cams change its course. The kit comes with "zigzag" and "figure of eight" pattern cams, plus one spare which can be cut as you like for an original course.

Front wheel can be manually locked via a screw on the underside, to make the car proceed in a straight line.

Rubber ring tires are included for all 3 road wheels.

Includes parts needed for snap-fit and screw-together assembly process. Does not require cement.

Approximate top speed: 2km/h.